Complex Design Support
Structures that cannot be cast in one piece are built as sections, laser welded and hand assembled. Difficult geometry is an engineering problem to solve, not a reason to say no.
Complex StructuresGold & Platinum · Diamond Setting · OEM
Custom Fine Jewelry
Manufacturing for
Brands & Designers
For jewelry brands, designers, retailers and studios: we turn your designs into finished jewelry — everyday gold and diamond-set styles as well as complex structures, from one-off samples to small batch production.
10+Years in jewelry making
5–6Senior craftsmen
2200W laser welders
Why Choose Us
Why brands and designers choose our workshop.
Four reasons to put your production on a bench instead of a catalogue.
Confidential Development
Drawings, CAD files and samples stay inside the project. Brand identity, product plans and market information are treated as confidential. An NDA can be signed before you send anything.
NDA On RequestFlexible Production
One-off prototypes, small launch batches and repeat runs, all held to the approved sample. Run size follows your project, not a fixed MOQ template.
One-off To Repeat RunsExperienced Craftsmanship
Senior craftsmen on the bench for filing, setting and hand finishing — with CAD, 3D printing and laser welding supporting the hand work.
Senior CraftsmenManufacturing Capabilities
What we actually make, and how.
Six production services, from everyday gold and diamond-set work to complex structures. Every one starts with a manufacturing review of your design, not a catalogue lookup.
01
Custom Jewelry Manufacturing
Gold, platinum and gemstone jewelry made to your drawings or reference set — from a single piece to a planned range.
Gold · platinum · gemstones02Prototype Development
Sketch review, CAD modelling, 3D printed wax or resin, then a one-off sample you can hold before production.
Sketch → CAD → print → sample03OEM / Private Label Manufacturing
Built to your tech pack or reference set, under your own finishes, hallmarks and packaging.
Your spec → your standard04Gold, Platinum & Gemstone Jewelry
Precious metals worked at the bench, with diamond and gemstone setting by hand.
Precious metals → setting05Hand Craftsmanship
Bench work, filing, polishing and stone setting by hand — the stages machines leave behind.
Bench work → finishing →06Small Batch Production
Launch batches and repeat runs, each one held to the approved sample.
Sample → repeat runs →From Your Design To Finished Jewelry
How your drawing becomes a piece you can hold.
Six development stages. Each one exists to catch a problem while it is still cheap to fix.
Sketch
Your sketch, 2D drawing or reference set is reviewed for what can actually be built.
CAD Development
Geometry modelled with real metal thickness, stone seats and assembly tolerances.
3D Print & Wax Model
A printed wax or resin prototype for proportion, fit and stone layout.
Manufacturing
Sectional fabrication where needed, laser welding, then hand assembly.
Finishing
Filing, sanding, polishing and stone setting completed by hand.
Finished Jewelry
Measured against the approved sample, then packed for shipment.
Manufacturing Cases
Cases where your design survived the workshop.
Every entry below is a real production record, written in the same three frames — the design challenge, the manufacturing route we took, and the finished result. Project type and client profile are listed with it, so you can see whether the work is close to yours. No rendered images, and no numbers that are not ours.
{term:jewel_category}
Home-V2
- Project type{post_meta:project_type}
- Design source{post_meta:design_source}
- Material{term:jewel_material}
- Process{term:jewel_technique}
View Case Study
No published cases yet. Case records appear here as soon as the first verified project is entered.
Manufacturing Process
From design brief to shipped parcel.
Seven visible stages. You always know which one your project is in.
01
Design Review
Send drawings, CAD or reference images. We flag what is manufacturable and where the structure needs to change.
02
Material Confirmation
Metal, alloy and stone plan agreed in writing before anything is cut.
03
Prototype Development
CAD modelling then 3D printed wax or resin sample, so the design is proved in hand before metal is committed.
04
Sample Approval
Sample made, measured and approved by you. This is the reference point for the production run.
05
Production
Sectional fabrication where necessary, laser welded, then hand assembly and stone setting on the bench.
06
Quality Inspection
Dimensional check, stone seating check, finish inspection before anything leaves the workshop.
07
Shipment
Packed and dispatched to your address, export documentation provided.
Production Evidence
See how your jewelry is made.
Real production evidence from our manufacturing process: photographs taken at each working stage, not renders and not stock imagery. Where a stage sits with a partner workshop, we say so.
CAD Design
In-house 3D modelling turns your sketch into a manufacturable geometry with real dimensions.
3D Print
Wax and resin prototypes printed for fit, proportion and stone layout before metal work starts.
Wax Model
Hand-carved or printed wax — the last moment to change a curve cheaply.
Sectional Fabrication
Parts too complex for one piece are built separately, then joined.
Laser Welding
Two 200W laser welders assemble sections that cannot be joined any other way.
Stone Setting
Diamond and gemstone setting by hand, with the seat matched to each stone's geometry.
Hand Finishing
Filing, sanding and polishing by hand — the stage machines leave behind.
Final Inspection
Measurements, stone seating and surface condition checked against the approved sample.
Photographs replace these placeholders stage by stage as each one is taken on a live project. Until then the tile says so — we would rather leave a gap than pass off a render as our workshop.
Who We Work With
Built for designers, studios, retailers and growing brands.
Each route below has its own review path, because the design risks are not the same.
Jewelry Brands
Private label production with your finishes, your packaging and your quality standard.
Private Label ProductionRetailers
Shelf-ready ranges and repeat runs, each one held to the approved sample.
Repeat RunsIndependent Designers
Concept to product development. Complex geometry, one-off pieces and first prototypes reviewed before anything is cut.
Concept To ProductJewelry Studios
Flexible custom production for the pieces your own bench cannot fabricate in-house.
Flexible Custom ProductionOur Manufacturing Workshop
The workshop behind the quote.
JewelCraftWorks is a jewelry workshop built on experienced craftsmanship, supported by modern manufacturing tools. Our bench is run by senior craftsmen working in precious metal and gemstone setting, with CAD and 3D printing in house to support production development on your orders. We support jewelry partners in Southeast Asia through long-term manufacturing cooperation.
Complex pieces are built as sections and laser welded together. When specialized processes are required, we work with trusted local partners while keeping quality control in our hands — and we tell you which part of your piece was made where.
- Gold and platinum fabrication at the bench
- In-house CAD modelling and 3D printed prototypes
- 2 × 200 W laser welders for sections that cannot be joined otherwise
- Diamond and gemstone setting by hand
- Private label production under your own finishes and packaging
Years in jewelry making
10+
Workshop capability
Gold and platinum fabrication, diamond and gemstone hand setting, and private-label production.
Main equipment
2 x 200 W laser welders, supported by in-house CAD modelling and 3D printing.
Craftsmanship
Complex pieces built as sections and laser-welded; specialized stages handled with trusted local partners.
Quality Control
Three checks, agreed in advance.
We define the acceptance standard with you before production starts, so "accepted" means the same thing to both of us.
Material Verification
Materials and stones are checked against the agreed specifications before production begins.
Production Inspection
Structure, fit and stone seating are reviewed while the piece is being made, not only at the end.
Final Quality Check
Dimensions compared with the approved sample, finish reviewed, and photos sent to you before dispatch.
Certifications and inspection reports are listed only when the relevant documents are in hand. Ask us for the actual report for your project.
Design Confidentiality
Your design stays yours.
We work as your manufacturing partner behind the scenes. Your brand identity, customer relationships and market information remain confidential.
Design Protection
An NDA can be signed before any file, drawing or sample changes hands. CAD files, drawings, samples and unreleased collections stay with the assigned team.
Brand Protection
Your brand identity, product plans and packaging are never presented as our own work, and pieces we make for you do not enter our portfolio.
Customer Relationship Protection
We stay behind your brand. Your customer relationships and market information remain yours, and CAD files, wax masters and fixtures belonging to your design are not reused for other clients.
Procurement Questions
Answers before you ask.
Yes. Sketches, 2D drawings, CAD files or reference images are all
acceptable starting points. We first run a manufacturing review and
send back a clear yes, a no, or a proposed change to the structure —
before any quotation is made.
Yes. CAD modelling is followed by a 3D printed wax or resin prototype,
then a one-off sample in metal if you need one. The prototype is the
reference point for the production run.
Gold and platinum group metals are our core work, along with diamond
and gemstone setting. Specific alloy grades and stone types are
confirmed per project in the material plan.
It depends on the structure, the setting and the finishing work, not
on a single fixed number. Tell us the design and the quantity you
need and we will tell you what is realistic.
Pending — minimum order
quantity to be confirmed before launchThere is no fixed schedule we can quote honestly, because each design
has a different route. After the manufacturing review we give you a
stage-by-stage timeline for your specific project.
Pending — production
time to be confirmed before launchYes, we have produced for overseas clients, mainly in Southeast Asia.
We handle export documentation and can share progress photos at each
production stage.
We treat your drawings, CAD files, samples and unreleased products as
your commercial assets. A confidentiality arrangement can be signed
before any design information is shared, and we keep template access
separate from production files.
Project Inquiry
Have a Jewelry Project?
Send a sketch, a CAD file or a reference image — a complete tech pack is not required to start. We review manufacturability first and come back with a manufacturing opinion, not just a price.
Prefer to talk first?Chat On WhatsApp